Modifying Registered Fax Forwarding Information - Triumph Adler DCC 2520 Instruction Handbook Manual

5
Select whether or not you want the
received documents to be printed out at
your fax. Press the [On] key to have
them printed and the [Off] key to stop
print out.
6 Select whether or not you want to designate a time for the Fax Forwarding operation to begin and
end. To set the time, press the [Delayed TX] key and go to the next step.
If you do not want to designate a time for the operation to begin and end, press the [All Day] key and
go to step 9. If you select All Day, the Fax Forwarding operation will continue indefinitely, regardless
of the time of the day.
> Designating the time for Fax Forwarding to begin and end
7
Use the numeric keys to enter the
desired time for Fax Forwarding to
begin.
NOTE: If you want to change the
entered time, use the [ ] and/or [ ]
keys to move the cursor to the desired
location.
8 Press the [Shut-off Time] key and use the numeric keys to enter the desired time for Fax Forwarding
to end.
9
Press the [Next] key. The currently registered information will be displayed.
10 Check that information and press the key that corresponds to any item that you want to modify.
11 Press the [OK] key. The message display will return to the same screen as was displayed in step 2.
If you are finished making settings, press the Reset key.

Modifying Registered Fax Forwarding Information

Perform the following procedure in order to modify information already registered for Fax
Forwarding.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Press the [Register] key. The Register
screen will appear.
Register memory transmission.
Local print/forw time
Print Here Fax For'd
On Delayed TX
Off All Day
mory transmission.
w time
Fax For'd Enter using # key.
Start Time
Delayed TX
Shut-off
Time
All Day
Ready for fax transmission.
Place the original & assign destination.
Dest
Address
Abbrev.
book
Basic Application
Other Features of this Fax
Back
Enter using # key.
Start Time 00:00.
Shut-off
00:00.
Time
Back
08:00.
00:00.
Next
TX
setting
Register Print Report
Memory
OCT-11
5-35