Turning The Bulletin Board On/Off (Bulletin Board Setting) - Triumph Adler DCC 2520 Instruction Handbook Manual

Turning the Bulletin Board ON/OFF (Bulletin Board setting)

If you use the Bulletin Board function, you only need to enter documents into memory once and they
will be available for transmission to any number of receiving parties upon receipt of their polling
request. (Refer to Preparing Documents for a Polling Transmission on page 5-10.) In order to use
the Bulletin Board function, it is necessary to turn it ON here in advance.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Press the System Menu/Counter key. The Default
Setting screen will appear.
2
Press the [Fax Default] key.
3 Press the [ ] cursor key until Bulletin Board is highlighted.
4 Press the [Change #] key.
5
Select whether you want to turn the
Bulletin Board function ON or OFF.
Press the [Save doc. after Tx] key to turn
it ON and the [Del. doc. after Tx] key to
turn it OFF.
NOTE: If you select Del. doc. after Tx, the documents to be deleted from memory after they are
transmitted once. If you select Save doc. after Tx, the documents will remain in memory waiting for
the next polling request even after they are transmitted.
6
Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
Various Settings and Registration
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
Default setting screen
Bulletin Board
Del. doc.
after TX
Save doc.
after TX
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back
7-5