Installing The Software; Make Sure Your Computer Is Ready - Intergraph Intense3D Wildcat 4110 User Manual

8
3. Turn on power to the workstation. If the monitor's Power On LED does not illuminate or the
monitor does not display the startup sequence, consult Chapter 4, "Troubleshooting."
NOTE If you installed the video card yourself, the computer will boot into VGA mode. Go to
"Installing the Software" in this chapter for instructions on installing the video drivers.
NOTE See "Connecting a Stereo Display Device" in this chapter for instructions on
connecting other devices to the video card.
NOTE If you ordered the Intense3D Wildcat 4110 video card with a system, it was installed
and configured before shipment. See Chapter 3, "Using the Video Card," for
instructions on adjusting the resolution, color depth, and refresh rate.

Installing the Software

If you are installing an Intense3D Wildcat 4110 video card or reinstalling its driver software, take
the following steps. Refer to the Microsoft Windows NT documentation and online Help for more
information on installing drivers and software application programs.

Make Sure Your Computer is Ready

Make sure your workstation has the following before installing Wildcat driver software:
Microsoft Windows NT Workstation 4.0 operating system with Service Pack 4 (or later)
3MB of free space on the computer's primary system disk
CAUTION You must have the correct driver for the Windows NT 4.0 operating system. If you
are unsure, refer to the
If you are reinstalling the Intense3D Wildcat 4110 driver, you must remove the current driver
before installing the update.
To remove the existing Intense3D Wildcat 4110 driver:
1. Log on to Windows NT using an account that has administrative privileges.
2. From the operating system Start menu, go to Settings/Control Panel and double-click
Add/Remove Programs.
3. On the Add/Remove Programs Properties Install/Uninstall tab, highlight the Intense3D
Display Driver and click Add/Remove.
4. Click Yes when prompted to confirm the driver removal, and follow the prompts.
To install the Wildcat 4110 video driver:
1. Log on to Windows NT using an account that has administrative privileges.
2. Insert the delivery media into the appropriate device (for diskettes or CD).
file on the driver delivery media for this information.
README