Getting Help - Intergraph Intense3D Wildcat 4110 User Manual

18
3. On the Add/Remove Programs Properties Install/Uninstall tab, highlight the Intense3D
Display Driver and click Add/Remove.
4. Click Yes when prompted to confirm the driver removal, and follow the prompts.
6. On the Add/Remove Programs Properties Install/Uninstall tab, highlight the Intense3D
Display Driver and click Add/Remove.
7. Click Yes when prompted to confirm the driver removal, and follow the prompts.
To reinstall the video driver:
1. Log on to Windows NT using an account that has administrative privileges.
2. Insert the delivery media into the appropriate device (for diskettes or CD).
8. From the operating system Start menu, go to Settings/Control Panel/Display/Settings/Display
Type/Change.
3. In the Change Display dialog box, click Have Disk.
4. In the Install From Disk dialog box, type the path to the directory that contains the delivery
media.
5. In the Change Display dialog box, verify that the Wildcat 4110 driver is highlighted, and then
click OK.
6. Click Yes when asked if you want to install a third-party driver. The files are copied from the
delivery media.
7. After the driver files are copied, a message that the driver successfully installed displays.
Click OK.
8. Click Close to exit the Display Type dialog box.
9. Click Close to exit the Display Properties dialog box.
10. When told that the workstation must be restarted for the new settings to take effect, remove
the diskette from the workstation's floppy disk drive, if applicable. Click Yes to restart the
workstation.
11. After the system restarts and you log in, a message displays stating that a new display driver
has been installed, and that you should use the Display option in the Control Panel to select
the preferred display resolution. Click OK.

Getting Help

If the troubleshooting procedures in this document do not resolve the problem, please contact your
vendor for technical assistance (refer your system documentation for instructions). For
information about your warranty, see your system documentation.