Intergraph Intense 3D Voodoo Tech Tips

Intense 3D Voodoo Tech Tips
Visit the Intense 3D Voodoo pages at http://www.intergraph.com/ics/voodoo
on the World Wide Web for other answers to frequently asked questions, or to
get the latest driver software and BIOS. Many problems can be fixed by
installing the latest driver software and flashing the BIOS to the latest version.
If the Primary Display Driver does not show up as certified in DirectX....
This is not a problem. The driver is fully DirectX 5.0 compatible and passes
the certification suite, but has not been officially certified by Microsoft. If
Turok and MotoRacer play correctly, the driver is functioning properly.
If installation or usage problems occur on some IBM Aptiva computers (the
driver hangs or does not start; games lock up or cause a reboot).... Disable
Rapid Resume and Advanced Power Management.
If Windows only reports 4 MB of RAM.... This is not a problem. Windows
does not use the 2 MB of RAM dedicated for texture memory, and thus only
reports the RAM available in Windows. The texture RAM is used in the games
supplied with Intense 3D Voodoo.
If a game does not play correctly.... Contact the game vendor, who can
provide you with the best technical support for their product. If Turok and
MotoRacer play, the driver software is installed correctly.
During driver software installation, if an error indicates no files for this
device on the CD-ROM....
Rename :\
u C AUTOEXEC
and attempt to install the driver again.
or
Copy the entire contents of the CD-ROM to a folder on the computer' s
u
hard disk drive; then install from the hard disk drive instead of from the
CD-ROM.
If QuickTime movies do not play, or games that use QuickTime do not play
cut scenes properly....
Remove and reinstall QuickTime.
u
or
Using QuickTime32 in Control Panel, change the draw method to Bitmap
u
(BMP) by clicking More, choosing the Video Tab, selecting Draw Method,
and changing to BMP.
. and :\
BAT C CONFIG
DHA024410 02/98
. ; then restart the computer
SYS