Finishing The Installation; Installing Driver Software - Intergraph Intense3D Wildcat 4105 Hardware User's Manual

Finishing the Installation

To finish the installation:
1. Close the workstation.
2. Connect the workstation's monitor as described in Chapter 1.

Installing Driver Software

You can download the Intense3D Wildcat video display driver software from
http://www.intense3d.com or from the delivery media provided. Refer to the Microsoft Windows
NT documentation and online Help for more information on installing drivers and software
application programs, and configuring your workstation's video display.
Make sure your workstation has the following before attempting to install Wildcat driver software:
Microsoft Windows NT Workstation 4.0 operating system with Service Pack 4 (or later)
software installed. You may also use Service Pack 3 and the appropriate QFE product
(QFE_INTENS4K)
3 MB of free space on the computer's primary system disk
CAUTION Make sure you have the correct driver to use with the Windows NT 4.0 operating
system. If you are unsure, refer to the
for this information.
To install Intense3D Wildcat 4105 driver software:
1. Log on to Windows NT using an account that has administrative privileges.
2. Create a directory on the workstation's primary system disk..
3. Copy the files from the delivery media to the directory created in step 2, or deliver them to
that directory from http://www.intense3d.com.
4. From the operating system Start menu, go to Settings/Control Panel/Display/Settings.
5. Click Display Type, and then click Change.
6. In the Change Display dialog, click Have Disk.
7. In the Install From Disk dialog, type the path to the directory that you created in step 2 and
click OK.
8. Verify that the Wildcat 4105 driver is highlighted in the Change Display dialog and click OK.
. file located on the delivery media
README TXT
9