A Specifications; Specifications - Fluke 2620A User Manual

Introduction
The instrument specifications presented here are applicable within the conditions listed
in the Environmental chapter.
The specifications state total instrument accuracy following calibration, including:
A/D errors
Linearization conformity
Initial calibration errors
Isothermality errors
Relay thermal emf's
Reference junction conformity
Temperature coefficients
Humidity errors
Sensor inaccuracies are not included in the accuracy figures.
Accuracies at Ambient Temperatures Other Than Specified
To determine typical accuracies at temperatures intermediate to those listed in the
specification tables, linearly interpolate between the applicable 0ºC to 60ºC and 18ºC to
28ºC accuracy specifications.
Response Times
Refer to Typical Scanning Rate and Maximum Autoranging Time later in this Appendix.
Appendix A

Specifications

A-1