List Button Operation - Fluke 2620A User Manual

2620A, 2625A
Users Manual
With the Hydra Series II Data Logger (2625A), a sample Store printout of stored values
for three scans would be as follows:
The Hydra Series II Data Logger can hold 2047 scans, with each scan containing 21
channels of data.
Press these buttons:
To select from these
choices:
Note 1. RS-232 computer interface must be active. If the IEEE-488 interface is active, an error results.
Note 2. "LASt" prints out all values in the Review array. Review array values are not affected. An error
results if Review array data has been cleared.
"StorE" prints out logged scan data from the Hydra Data Logger (2620A) memory. Logged data is
not affected. An error results if there is no logged data.
Note 3. Press
3-24
07:41:37 02/09/91
CH LAST VALUE
1: 097.32 mVDC
2: 0.0973 VDC
3: 00.097 VDC
4: 000.10 VDC
5: OL mVAC
6: OL VAC
7: 05.511 VAC
8: 005.51 VAC
9: OL OHMS
10: OL kOHMS
11: 08.276 kOHMS
12: 008.28 kOHMS
13: 0.0083 MOHMS
14: 00.008 MOHMS
15: OL HZ
16: 9.7193 kHZ
17: 09.719 kHZ
18: 009.72 kHZ
19: 0.0097 MHZ
07:41:5202/09/91
5: -3.2345 mMX+B12:123.87 kOHMS17:31.268VAC
ALM:15DIO:255TOTAL:0
07:41:5302/09/91
5: -3.2345 mMX+B12:123.87 kOHMS17:31.268VAC
ALM:15DIO:255TOTAL:0
07:41:5402/09/91
5: -3.2345 mMX+B12:123.87 kOHMS17:31.268VAC
ALM:15DIO:255TOTAL:0
Table 3-16. List Button Operation
(Note1)
to abort a printout while it is occurring.
MAX VALUE MIN VALUE
098.51 mVDC 096.10 mVDC
0.0985 VDC 0.0961
00.099 VDC 00.096
000.10 VDC 000.10
OL mVAC OL
OL VAC OL
05.582 VAC 05.414
005.58 VAC 005.41
OL OHMS OL
OL kOHMS OL
08.374 kOHMS 08.231 kOHMS
008.37 kOHMS 008.23 kOHMS
0.0084 MOHMS 0.0082 MOHMS
00.008 MOHMS 00.008 MOHMS
OL HZ OL
9.7239 kHZ 9.6771 kHZ
09.724 kHZ 09.677 kHZ
009.72 kHZ 009.68 kHZ
0.0097 MHZ 0.0097 MHZ
(Note 2)
LASt
StorE
VDC
VDC
VDC
mVAC
VAC
VAC
VAC
OHMS
kOHMS
HZ
(Note 3)