Visual Pa2 (Visual Pa2 Enabled Projectors Only); Starting Visual Pa2 - Mitsubishi Electric PJLink FD630U User Manual

9. Visual PA2 (Visual PA2 enabled projectors only)

Visual PA2 is a feature to display messages on the projector screen.
It can be used for all active Visual PA2 enabled projectors.
Additionally, the projector is capable of reading aloud on-screen messages using the Text Speech function. Note that
some projectors may not have this function. See your projector User Manual for more information.
Visual PA2 is not available when using the projectors listed in page 30.
This feature operates by referencing the information displayed in the projector list. You need to click [Refresh Status]
to update the list before using this feature.

9.1. Starting Visual PA2

(1) Click [Visual PA2] in the toolbar on the main screen.
• "Visual PA2" window is displayed.
Click to delete entered
text in the Textbox.
Click to load saved messages.
Click to save messages entered in Textbox.
Settings specified for Text, Frame, Location, and
Text Speech can also be saved.
Select to set Schedule On or Off. When you click Edit, the Visual PA2 Schedule window is
displayed. (See page 27.)
(2) Specify Text, Frame, Location, and Text Speech, enter text, and then click [Send].
• Alphanumerical characters, space, and symbols including ! " # $ % & ( ) + , - _ / : ; < = > ? @ [ ] can be used.
(3) Click [Stop] to stop displaying the message on the projector screen.
<Note>
• If you exit Visual PA2 while the message is being displayed on the projector screen, a communication error
may occur, and an error window may appear. If this happens, restart Visual PA2 and click [Stop].
Click to display messages
entered in the Textbox.
Click to stop displaying messages.
25
Enter text to display messages on
the projector screen.
Click to exit Visual PA2.
Choose the color and font.
You can also choose the flash text
option.
Choose the color and pattern of
the frame.
Specify the location of messages.
Choose between Horizontal and
Vertical, and then choose the
relative position.
Select to set Text Speech to On or
Off. When Speech is set to On, the
projector reads aloud on-screen
messages. (If your projector is not
speech enabled, messages are
displayed on the screen only.)
When Repeat is set to On, the
projector reads aloud on-screen
messages three times.
<Note>
• If the Text Speech enabled
projector is not registered in
ProjectorView Global+, this option
will be disabled.