Emergency Calls; Call Waiting; Placing Calls On Hold; Muting The Microphone - Mitel INT4000 User Manual

Answering and Placing Calls

Emergency Calls

To make an emergency call:

Call Waiting

If you receive a call while you are already on another call, you will hear a "call waiting" tone
and/or you will see a display.
To respond to a waiting call:
•
•
•

Placing Calls on Hold

You can place calls on hold in one of two ways: individual or system.
•
•
To place a call on Individual Hold:
1.
2.
To place an external call on System Hold:
1.
2.
To return to a call that is on hold:

Muting the Microphone

To mute the microphone so that you can hear the other party, but they cannot hear you
(this does not put them on hold):
To return to the call:
Page 18
Press the CALL button and dial
emergency number.
To end the current call: Press
again.
To place the current call on hold: Press
rings, press again.
TALK
To have the caller hear DND signals: Press
information about DND mode.)
Individual Hold places the call on hold at one endpoint. It can then be directly picked up at
that endpoint or it can be picked up at another endpoint using the Call Pickup (Reverse
Transfer) feature (see page
System Hold places the call on hold in the system. You can then pick up the call at any
endpoint that has a flashing button for the call, including the endpoint that placed it on
hold.
NOTE You cannot place internal calls on system hold.
Press .
HOLD
Press or place another call.
TALK
Press and
SPCL 3
Press or place another call.
TALK
Press or the flashing button.
HOLD
Press . While the microphone is muted, the TALK (
ON/OFF MUTE
flashes.
Press .
ON/OFF MUTE
to automatically place a call to the preset
9 1 1
. The waiting call rings in. Answer by pressing
TALK
and then
HOLD
and
SPCL
20).
.
3 5
Mitel ® INT4000 User Guide – Issue 6, December 2008
. When the waiting call
TALK
.
(See page 23 for more
6
) icon in the display
TALK