Commissioning
8.2 Switch on the device
8.2
Switch on the device
8.2
Procedure
1. Plug the power plug of the supplied power supply cable in the AC/DC power supply
2. Lock the power plug in place.
3. Plug the power supply cable of the computer unit into a socket with a grounded protective
4. Switch on the computer unit at the power switch.
8-2
connector of the computer unit.
conductor.
The "POWER" LED will light up. The device starts up and boots.
Self Test
After connection to the power supply, the device performs a self test. During the self test,
the message "Press F2 to enter SETUP" appears briefly.
When the self-test is finished, the operating system will be loaded.
Operating instructions, Release 07/2006, A5E00877780-01
SIMATIC Panel PC 877