Siemens SIMATIC PANEL PC 877 Operating Instructions Manual page 162

Industrial pc
Hide thumbs Also See for SIMATIC PANEL PC 877:
Table of Contents

Advertisement

Alarm, error and system messages
13.1 Boot error messages
On-screen error message
Keyboard error
Key seizure
System RAM Failed at offset:
Shadow RAM Failed at offset:
Extended RAM Failed at offset:
Failing Bits:
Operating system not found
Previous boot incomplete
Default configuration used
System cache error Cache
disabled
Monitor type does not match
CMOS Run SETUP
System time-out
Real-time clock error
Keyboard controller error
13-2
Meaning / suggestions
Check whether the keyboard is properly connected.
Check whether a key on the keyboard has seized.
Memory error.
Contact your technical support team.
Memory error.
Contact your technical support team.
Memory error.
Contact your technical support team.
Memory error.
Contact your technical support team.
Possible causes:
No operating system present
Wrong drive addressed (disk in drive A/B)
Incorrect active boot partition
Wrong boot drive settings in SETUP
Hard disk is not connected / defective
Abort of the previous BOOT procedure, for example, due to a
power failure. Adjust the settings in SETUP.
Error in the CPU's cache module.
Contact your technical support team.
The monitor does not match the SETUP entries.
Adapt the SETUP entries to the monitor.
Hardware error.
Contact your technical support team.
Clock chip error.
Contact your technical support team.
Keyboard error.
Contact your technical support team.
Operating instructions, Release 07/2006, A5E00877780-01
SIMATIC Panel PC 877

Advertisement

Table of Contents
loading

Table of Contents