Mounting Cut-Out; Preparing The Mounting Cut-Out - Siemens SIMATIC PANEL PC 877 Operating Instructions Manual

4.5

Mounting cut-out

4.5
4.5.1

Preparing the mounting cut-out

The following illustration show the dimensions for the mounting cut-out.
Figure 4-3 Drill holes for the screws and pressure points for the clamp screws
(1)
(2)
(3)
Note
Installed dimensions can be read from the dimension overview or they can be transferred to
the cabinet from the mounting template supplied.
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
Drill hole for screw attachment
Pressure points for clamp
Setscrews
(4) Clamp
(5) R 120 in the seal area
Z
(6) Seal area
Application planning
4.5 Mounting cut-out
4-9