Securing The Device With Screws - Siemens SIMATIC PANEL PC 877 Operating Instructions Manual

5.2

Securing the device with screws

5.2
Note
To secure the 19" front panel with screws, backing plates with Order No. 6AV7672-8KE00-
0AA0 are required on the front.
Drilling holes
Steps for drilling holes
1
2
3
Notice
Risk of damage
Ensure that no metal cuttings enter the device when the holes are drilled. Cover the device
with film or when drilling, use removal by suction.
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
Drill holes (Ø approx. 2.5 mm) from the rear in the 4 recesses of the control unit.
Use a Ø 5.5 mm bit for M5 and a Ø 6.5 mm bit for M6
Deburr the holes from the front of the control unit
5.2 Securing the device with screws
Installation
5-3