Table of Contents
Advertisement
Detailed descriptions
17.6 BIOS setup
Settings in the Advanced menu
Installed O/S
Reset
configuration
data
Local bus IDE
adapter
Large disk
access mode
USB boot:
17-52
Plug&Play means that all modules are automatically detected and installed,
providing they support the Plug&Play functionality.
[Other]
BIOS handles the entire Plug&Play capability, default setting.
[Win95]
BIOS handles the entire Plug and Play capability
[Win98]
The operating system handles some of the Plug&Play functions.
[WinMe]
The operating system handles the Plug&Play functions.
[Win/2000/XP] The operating system handles the Plug&Play functions.
[Yes]
All installations under Plug and Play are deleted and the
configuration is retriggered the next time the system boots. The
entry is then reset to [No]. System components that do not support
Plug&Play have to be entered manually.
[No]
The Plug&Play system components are initialized after the next
system start.
[Primary]
One IDE interface for max. two drives.
[Secondary]
[Primary &
Two IDE interfaces for max. four drives.
Secondary]
[Disabled]
No local IDE interface.
[DOS]
The drive tables are adapted for DOS access operations in
accordance with Enhanced IDE.
[OTHER]
The tables are not adapted.
This function defines whether the operating system can be booted from a USB
device.
Operating instructions, Release 07/2006, A5E00877780-01
SIMATIC Panel PC 877
Advertisement
Table of Contents
