Preparing The Mounting Cut-Out - Siemens SIMATIC PC 577B Operating Instructions Manual

3.3

Preparing the mounting cut-out

The following illustration shows the dimensions for the mounting cut-out.
Figure 3-2 Installation cut-out
(1)
(2)
(3)
Note
Mounting dimensions can be read from the dimension overview or they can be transferred to
the cabinet from the mounting template supplied.
SIMATIC Panel PC 577B
Operating Instructions (Compact), 04/2008, A5E02135173-01
Drill hole for screw attachment
Pressure points for clamp
Setscrews
Installation / panel-mounting
3.3 Preparing the mounting cut-out
(4) Clamp
(5) R 120 in the seal area
Z
(6) Seal area
11