Velocity Control
Specifies the depth and direction of the effect that
velocity will have on the level of the amp EG.
Amp1 EG changes (level) (AMS=Velocity, Intensity=+value)
Note-on
Note-on
Note-off
When keyboard is
When keyboard is
played softly with a
played strongly with
Sustain of 0, and Attack
each Level set to "+"
and Break set to "+"
(the settings of 4-3a:
Level)
4–3d: Time Modulation
AMS1 (Alternate Modulation Source 1)
Selects a modulation source 1 ( p.48 of this manual)
that will control the Amp EG times.
Intensity (EG Time AMS1 Intensity)
Specifies the depth and direction of the effect that
"AMS1" will have on the Amp EG times.
AMS2 (Alternate Modulation Source 2)
Selects a modulation source 2 ( p.48 of this manual)
that will control the Amp EG times.
At (Attack Time AMS2 Intensity)
Dc (Decay Time AMS2 Intensity)
Sl (Slope Time AMS2 Intensity)
Rl (Release Time AMS2 Intensity)
Specifies the depth and direction of the effect that
"AMS2" will have on each EG time.
Amp EG changes (time) (AMS=Velocity, Intensity=+value)
Note-on
Note-on
Note-off
When keyboard is
When keyboard is
played softly with At,
played strongly with
Dc, Sl, and Rl set to "+"
At, Dc, Sl, and Rl
The settings of 4-3d:
set to "+"
AMS2
42
[–99...+99]
Note-on
Note-off
Note-off
When keyboard is
played strongly with
each Level set to "-"
[Off...MIDI:CC#83]
[–99...+99]
[Off...MIDI:CC#83]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
Note-on
Note-off
Note-off
When keyboard is
played strongly with
At, Dc, Sl, and Rl
set to "-"
4–4: Output Level / Pan
4–4a
4–4b
4–4a: Output Level
Output Level
Specifies the output level following the amp.
4-4b: Pan
Pan
Set the pan (stereo location) of oscillator 1.
L001 is far left, C064 is center, and R127 is far right.
AMS (Alternate Modulation Source)
Selects the modulation source ( p.36 of this manual)
that will move the panning of amp 1 relative to the
Pan setting.
Intensity (Panpot AMS Intensity)
Specifies the depth and direction of the effect of
"AMS" on the panning.
[0...127]
[L000...C064...R127]
[Off...MIDI:CC#83]
[–99...+99]
Need help?
Do you have a question about the EXB-MOSS and is the answer not in the manual?