Korg EXB-MOSS Manual page 15

Intensity (Input Level AMS Intensity)
Specifies the depth and direction of the waveform
modulation controlled by the "AMS."
Type (Wave Shape Table Type)
Use the radio buttons to select the wave shaping
table which will modify the input waveform.
Clip (clip type) and Reso (resonant type) tables will
modify the waveform as shown by the diagrams in
Shape, below.
Offset (Wave Shape Offset)
Specifies an offset amount that will be added to the
signal specified by "Input."
Example of when Offset is modified (Table Type: Clip)
Output level
Output waveform
Offset=50
Input level
Input waveform (Input Level fixed)
Shape
Specifies the characteristics of the table which will
modify the input waveform. The characteristics of the
table will change as follows.
Shape of the wave shaping table and the Shape parameter
CLIP type
Output level
Input
Shape:0
Shape:99
level
Waveform
level
Waveform before being input to the table
Resonant type
Output level
Input
Shape:0
Shape:99
level
Waveform
level
Waveform before being input to the table
AMS (Alternate Modulation Source)
Selects a modulation source ( p.48 of this manual)
that will control "Shape."
Intensity (Shape AMS Intensity)
Specifies the depth and direction of the waveform
modulation controlled by the "AMS."
Balance
Specifies the balance between the signal that has
passed through the wave shaping table and the output
signal from the standard oscillator. With a setting of
16
[–99...+99]
[Clip/Reso]
[–99...+99]
Offset=0 Offset=-50
[0...99]
Output of the clip type table when a sawtooth
waveform is input
Output of the resonance type table when
a sawtooth wave is input
[Off...MIDI:CC#83]
[–99...+99]
[0...99]
99, it will be only the output of the wave shaping
table.
AMS (Alternate Modulation Source)
Selects a modulation source ( p.48 of this manual)
that will control "Balance."
Intensity (Balance AMS Intensity)
Specifies the depth and direction of the waveform
modulation controlled by the "AMS."
[Off...MIDI:CC#83]
[–99...+99]