Korg EXB-MOSS Manual page 30

Ctrl (Control)
Selects a modulation source ( p.48 of this manual)
that will control the harmonics effect.
Intensity (Harmonics Control Intensity) [–99...+99]
Specifies the depth and direction of the control that
"Ctrl" will have on the harmonics effect.
When making the Position setting, you must
assign Control to a controller other than OFF,
and raise the Intensity value. The decay time
of the harmonics effect will differ depending
on the keyboard location that you play.
1–3e: Pickup
Pickup
If this is checked, the sound will be passed through a
simulated pickup. If this is not checked, the sound
will remain unchanged.
Location, AMS, and Intensity can be set when
Pickup has been checked.
Location
Adjusts the change in tone that results from differ-
ences in pickup location.
AMS (Alternate Modulation Source)
Selects a modulation source ( p.48 of this manual)
that will control "Pickup."
Intensity (Pickup Location AMS Intensity)
Specifies the depth and direction of the effect of
"AMS."
1–3f: Low EQ
Frequency
Specifies the cutoff frequency of the Low EQ.
Gain
Specifies the gain of the Low EQ.
Low Boost
Specifies how the low frequency range will be
emphasized. Raising this value will cause the low
frequency range to be emphasized more strongly.
[Off...MIDI:CC#83] Bowed String Model
This oscillator is a physical model which simulates the
sound of a bowed string instrument such as a violin or
cello. By controlling the bowing speed and the bowing
pressure, you can create performance expressions that
are very close to those of an actual bowed string
instrument.
[0...99]
[Off...MIDI:CC#83]
1–3a: Bow Speed
EG
Selects the EG which will control bowing speed (the
[–99...+99]
speed at which the bow moves across the string).
Int (Speed Modulation EG Intensity)
Specifies the depth and direction of the effect of "EG"
With negative (–) settings, the direction of the bow
speed will be inverted.
AMS1 (Alternate Modulation Source 1)
[0...49]
Selects a modulation source 1 ( p.48 of this manual)
[–18...+18]
that will control bowing speed.
Instead of using an EG to modify the bowing speed,
you can use the Ribbon Controller or Joy Stick to
[0...99]
simulate bowing without using an EG.
Int (Speed AMS1 Intensity)
Specifies the depth and direction of the effect of
"AMS1."
AMS2 (Alternate Modulation Source 2)
Selects a modulation source 2 ( p.48 of this manual)
that will control bowing speed.
Peaking EQ
Bowed String Model
Bow
Pressure
Bridge Reflection
Position
String vibration
Bowed String Model
1–3a
1–3b
1–3c
1–3d
Bridge Reflection
String
Parameters related to the string
Bow Speed
String Damp
Dispersion
[EG 1...EG 4, AmpEG]
[–99...+99]
[Off...MIDI:CC#83]
[–99...+99]
[Off...MIDI:CC#83]
31