Assigning Nrpn Or Rpn - Korg microKONTROL Owner's Manual

Midi studio controller
Table of Contents

Advertisement

Operation–Setting mode
6
Use the [VALUE] dial or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4
"About the trigger pad functions–Input numerical values")
7
Press the OCTAVE SHIFT/CURSOR [®] to proceed to "Name," where
you can specify a name for the encoder.
You can specify the name ("Name") only if you assigned a control
change. You cannot specify the name if you assigned NRPN or RPN.
8
Use the [VALUE] dial to select a name.
The name you specify will appear in the sub-display in Play mode.
For a list of the available names, refer to the separate leaflet "Parameter
Name (Encoder/Slider)."
You cannot specify the name as individual characters
9
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you've made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see "Scene mode - [16] WRITE"
(☞p.54).
26
(Green)
(Green)
(Green)
(Green)

■ Assigning NRPN or RPN

If you select NRPN or RPN in "Message Select," you need to set the "MSB,"
"LSB," and "MIDI Channel" for the message.
RPN (Registered Parameter Number) is a type of message used to make
settings that are not limited to devices made by a single manufacturer.
Messages of this type include RPN Fine Tune [MSB=00, LSB=01], RPN
Coarse Tune [MSB=00, LSB=02], and RPN Pitch Bend Range [MSB=00,
LSB=00].
NRPN (Non Registered Parameter Number) is a type of message that can
be freely used by instrument manufacturers and devices.
1
In "Message Select," select NRPN or RPN.
You can select these by turning the [VALUE] dial toward the right
following CChg#127.
2
Press the OCTAVE SHIFT/CURSOR [®] to proceed to "MSB."
(Green)
3
Use the [VALUE] dial or the pads to input the "MSB" value. The range
is 0–127. "MSB" stands for "Most Significant Byte."
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "LSB."
4
(Green)
(Green)
(Green)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents