Assigning Different Midi Messages To The +X And -X Directions - Korg microKONTROL Owner's Manual

Operation–Setting mode
Assigning different MIDI messages to the +X and –X
directions
Here's how to assign different MIDI messages to the –X and +X directions of
the joystick. You can assign aftertouch, velocity, or a control change (CC#).
Hold down the [SETTING] key and press pad [5] to enter the Joystick
1
–X assignment page, and choose +Prm–Prm for "Assignment Select."
2 Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "+X/–X
Select" (select the direction that you want to assign).
3 Use the [VALUE] dial to select whether you will assign the +X
direction or the –X direction.
Param: –X
Assign the –X direction.
Param: +X
Assign the +X direction.
34
(Red) (Green)
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "Message
4
Select" (selecting MIDI message).
(Green)
5 Use the [VALUE] dial to select the MIDI message you want to assign.
NoAssign
No MIDI message will be assigned to the joystick range you are
assigning. If you select NoAssign, the setting will be updated when
you press the [ENTER] key. ☞Step 8
A.Touch (AfterTouch)
Keyboard aftertouch will be assigned. If you select A.Touch, you can
also select the type of aftertouch. ☞p.32 "Assigning aftertouch"
Velocity
Assign keyboard or pad velocity. If you select Velocity, you can also
select the type of velocity. ☞p.33 "Assigning velocity"
CtrlChg# (Control Change)
Assign control change. If you select CtrlChg#, you can also select the
control change number. ☞p.33 "Assigning a control change"
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "MIDI
6
Channel" (specify the MIDI channel).
(Green)
(Green)
(Green)