Introduction–Driver installation and settings
■ Allowing installation of an unsigned driver
If your computer has been set so that drivers without a digital signature
cannot be installed, you will not be able to install the Korg USB-MIDI Driver.
Use the following procedure to change your settings so that you can install
the driver.
1
On the taskbar, click the [Start] button and then [Control Panel] to
open the Control Panel.
From the Control Panel, open [System] and click the [Hardware] tab.
Then click the [Driver Signing] button.
10
If "What action do you want Windows to take?" is set to [Block], you
2
will not be able to install the driver. Choose [Ignore] or [Warn], and
then click [OK]. If necessary, change this setting back to its original
setting after you have installed the driver.