Korg microKONTROL Owner's Manual page 9

[MESSAGE] key
To enter Message mode, hold down this key
and press the trigger pad for the desired
page.
[SETTING] key
To enter Setting mode, hold down this key
and press the trigger pad for the desired
page.
[SCENE] key
To enter Scene mode, hold down this key
and press the trigger pad for the desired
page.
[HEX LOCK] key
Press this key to enable and disable HEX
LOCK mode. When it's enabled, the LED
will light up, and you can then use the
trigger pads to input hexadecimal values.
Also, MIDI messages and values shown in
the main display and sub-displays will be
shown in hexadecimal form.
OCTAVE SHIFT/CURSOR keys
In Play mode, these function as Octave Shift
keys to shift the octave of the keyboard.
(☞p.22)
In other modes, the LEDs on both keys will
turn on, and you can then use them as
cursor keys when you make parameter
settings, etc.
[EXIT] key
Press this key to return to Play mode from
Setting, Message, or Scene modes, or to
cancel a setting or operation.
[ENTER] key
In Setting mode, press this key to finalize a
setting or value.
In Message mode, press this key to transmit
the specified MIDI message.
Introduction–Parts and what they do
Sub-displays
These show the names assigned to each
encoder and slider, or the values that are
transmitted when they are moved.
Encoders and sliders
You can assign a different MIDI message to
each encoder and slider, and use them to
control connected devices, soft
synthesizers, and DAW programs on your
computer.
You can assign control change messages
(including RPN and NRPN) to the
encoders and sliders.
3