Pad Illumi (Pad Illumination Setting); Transpose (Transpose Setting) - Korg microKONTROL Owner's Manual

Operation–Setting mode
Use the [VALUE] dial to select the backlight color.
4
Off: backlight off
Red: red
Grn: green
Org: orange
5 Press the OCTAVE SHIFT/CURSOR [√] key to return to "Display
Select," and make settings for other displays in the same way.
When you have finished making settings for each display, press the
6
[ENTER] key to save the settings and return to Play mode.

[12] PAD ILLUMI (PAD Illumination setting)

In the PAD Illumination setting page you can specify whether the pads will
light when they transmit a MIDI message in Play mode.
1 Hold down the [SETTING] key and press pad [12].
The [SETTING] key and pad [12] will light, and you will be in the PAD
Illumination setting page. The main display will indicate "Blink" (pad
illumination setting).
2 Use the [VALUE] dial to specify whether the pad will momentarily
light or go dark, or not change when you strike a pad in Play mode.
BlinkOff: The pad illumination will not change. (It will remain lit or
dark.)
BlinkOn: The pad will momentarily light or momentarily go dark.
Press the [ENTER] key.
3
The setting will be saved, and you will return to Play mode.
40

[13] TRANSPOSE (Transpose setting)

The Transpose setting sets the transposition of the keyboard.
You can adjust this in semitone steps.
1 Hold down the [SETTING] key and press pad [13].
The [SETTING] key and pad [13] will light, and you will be in the
Transpose setting page. The main display will indicate "Transpose"
(transpose setting).
2 Use the [VALUE] dial or the pads to specify the keyboard transpose
setting. The range is –24 – +24 (±2 octaves). (☞p.4 "About the trigger
pad functions–Input numerical values")
3 Press the [ENTER] key.
The setting will be saved, and you will return to Play mode.