Dump; Preload - Korg microKONTROL Owner's Manual

[14] DUMP

In the Dump page you can transfer data between the microKONTROL and
librarian software running on your computer. You can transfer both scene
parameters and global data.
1 Hold down the [SCENE] key and press pad [14].
The [SCENE] key and pad [14] will light, and you will enter the Dump
page.
2 From the librarian software running on your computer, transmit a
MIDI Data Dump or a Dump Request to transfer data.
For details on using the librarian software to transfer data, refer to
"Using the Librarian software" (☞p.57).
3 Press the [EXIT] key to return to Play mode.
If you are using the librarian software, the microKONTROL will move
to the Dump page automatically.

[15] PRELOAD

Here you can load the factory-preset scenes into the microKONTROL's
internal memory.
You can load any of the twelve preset scenes into any scene number.
1 Hold down the [SCENE] key and press pad [15].
The [SCENE] key will light, and you will enter the Preload page.
The main display will indicate "Source" (select the preset that you
want to load), and that pad will blink.
The selectable parameter or value will blink in the main display.
2 Use the [VALUE] dial or the pads to select the preset scene that you
want to load. If you use the pads, simply press the pad for the scene
you want to load.
3 Press the OCTAVE SHIFT/CURSOR [®] key to proceed to
"Destination" (select the loading destination).
(Red)
Use the [VALUE] dial or the pads to select the destination into which
4
you want to load the preset scene.
Press the OCTAVE SHIFT/CURSOR [®] key.
5
The main display will ask "Sure ?" ("Are you sure you want to load?")
6 Press the [ENTER] key to load the preset scene.
When loading is completed, the main display will indicate "Complete"
and you will return to Play mode.
If you press the [EXIT] key, the scene name will be displayed.
If you decide to cancel mid-way through this procedure, press the
[EXIT] key to return to Play mode.
Never turn off the power while loading data; doing so may cause the
internal data to be damaged.
Operation–Scene mode
(Green)
53