Saving Scenes On Your Computer; About The Data You Can Save; Loading Scenes Into The Microkontrol - Korg microKONTROL Owner's Manual

Appendices–Using the Librarian software

Saving scenes on your computer

Here's how to save the twelve scenes of the microKONTROL as a Scene Set
on your computer.
Do not operate the microKONTROL while it is sending or receiving
data. If an error message appears while sending or receiving data, check
the connections with the MIDI driver.
Start up the Librarian software.
1
Click the "Receive" button located at the lower left of the scene pad
2
display.
The microKONTROL will automatically enter the Dump page of Scene
mode, and will transmit data to the Librarian software.
When the Librarian software finishes receiving the data, it will display
a dialog box. Click the "OK" button.
The received data is displayed in the scene pad display.
You can press the "Parameter Viewer" button to open the parameter
viewer and check the assignments of the various controllers.
To edit the name of a scene, double-click the scene name displayed
above the scene pad.
3 Click the "Save" button.
The "Save Scene Set" dialog box will appear.
4 Assign a file name, specify the save-location, and click the "Save"
button. The file will be saved to the location you specified.
58

About the data you can save

The following data can be transferred between the Librarian software and
the microKONTROL.
Scene set A file that contains twelve scene sets. The filename has an
extension of ".mks".
Scene data Data for one scene. The filename has an extension of
".mkd".
Global data Global data. The filename has an extension of ".mkg".
Scene data can be exchanged with the microKONTROL only in scene
sets.

Loading scenes into the microKONTROL

Here's how to load a scene set from your computer into the
microKONTROL.
1 In the folder tree, select the scene set file (extension ".mks") that you
want to load, and drag it into the scene pad display.
If the "Select Scene" dialog box appears, choose All Scene and click the
"OK" button.
To save a scene, drag the scene name (from above a scene pad) into the
folder tree. To load a scene, drag the saved scene from the folder tree
onto a scene pad. To exchange scenes between two pads, drag the first
scene's name to the second scene's pad.
Click the "Transmit" button.
2
A dialog box will ask whether you want to rewrite the data in the
microKONTROL's memory. Click the "OK" button.