Introduction–Driver installation and settings
Driver installation and settings
Windows XP users
■ Installing the Korg USB-MIDI Driver
In order to install (or uninstall) the driver in Windows XP, you must
have Administrator privileges. For details, contact your system
administrator.
If you encounter problems during installation, you may need to make
settings so that Windows will not stop you from installing the driver
due to its lack of a digital signature. For more information, see
"■ Allowing installation of an unsigned driver" (☞p.10).
This driver is for Windows XP only. It cannot be used in Windows 95/
98/Me/2000.
1
Use a USB cable to connect the microKONTROL to your computer, and
turn on the power of the microKONTROL. (☞p.12 "Making
connections and turning the power on")
Windows will detect the connection with the microKONTROL.
6
Then the default driver will be installed.
2
From the taskbar, click [Start]➞[Control Panel] to open the Control
Panel.
From the Control Panel, start up [Sounds and Audio Devices], and
click the [Hardware] tab.
From the list of devices, select [USB Audio Device]. Make sure that the
"Location" field below the list shows "microKONTROL," and click the
[Properties] button.