Korg MMT RADIAS Owner's Manual page 137

only MFX
SmthHall
Hall-type reverb, producing the reverberation of a larg-
er hall or stadium. The reverberation features a smooth
release.
Selectable only for the master effect.
only IFX
Plate
Plate reverb.
Selectable only for an insert effect.
only MFX
WetPlate
Plate reverb that produces warm, dense reverberation.
Selectable only for the master effect.
only MFX
DryPlate
Plate reverb with a dry, light feel.
Selectable only for the master effect.
Room
Room-type reverb with a tight feeling, and emphasis on
the early reflections. By changing the balance between
the early reflections and the reverberation, you can sim-
ulate different types of wall material.
only MFX
BritRoom
Room-type reverb with a bright feeling, and emphasis
on the early reflections. (☞Reverb Room)
Selectable only for the master effect.
Rev Time (Reverb Time)
Sets the reverberation time.
The selectable range of reverb time will depend on the
"Type" setting.
Hall–DryPlate: 0.1–10sec
Room, BritRoom: 0.1–3.0sec
High Damp
Sets the damping amount in the high range.
only MFX
Pre Delay
Sets the delay time from the dry sound.
only MFX
PrDlyThru (Pre Delay Thru)
Sets the mix ratio of non-delay sound.
only MFX
Trim (Pre EQ Trim)
Sets the EQ input level.
only MFX
LoEQGain (Low EQ Gain)
Sets the gain of Low EQ.
only MFX
HiEQGain (High EQ Gain)
Sets the gain of High EQ.
only MFX
ER Level
Sets the time taken from the original sound to the first
early reflection.
When used for the master effect, this is displayed and
can be set only if Room or BritRoom is selected.
only MFX
Rev Level (Reverb Level)
Sets the reverberation level.
This is displayed and can be set only if Room or Brit-
Room is selected for the master effect.
12. Early Reflect (Early Reflections)
This effect is only the early reflection part of a reverber-
ation sound, and adds presence to the sound. You can
select one of the four decay curves.
Dry/Wet
Sets the balance between the effect and dry sounds.
Type
Selects the decay curve for the early reflection.
[00.1...10.0sec]
[000...100%]
ER Time
Sets the time length of early reflection.
The range is 10–400 msec when used for an insert effect,
[000...200msec]
or 10–800 msec when used for the master effect.
Pre Delay
[000...127]
Sets the time taken from the original sound to the first
early reflection.
The range is 0–100 msec when used for an insert effect,
[000...127]
or 0–200 msec when used for the master effect.
Trim (Pre EQ Trim)
[–15.0...+15.0dB]
Sets the input level of EQ applied to the effect sound.
LoEQGain (Low EQ Gain)
[–15.0...+15.0dB]
Sets the gain of Low EQ.
HiEQGain (High EQ Gain)
[000...127]
Sets the gain of High EQ.
High Damp
Sets the damping amount in the high range.
Low Damp
[000...127]
Sets the damping amount in the low range.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
EQ Trim IFX: High Damp
MFX: HEQ
+
Pre Delay
IFX: Low Damp
MFX: LEQ
EQ Trim
Right
[Sharp, Loose, Modulation, Reverse]
Sharp
Loose
Modulated
Reverse
Dry
Pre Delay ER Time
[IFX: 010...400msec/MFX: 010...800msec]
[IFX: 000...100msec/MFX: 000...200msec]
only MFX
only MFX
only IFX
only IFX
Effect parameters
Dry / Wet
Early Reflections
Dry / Wet
[Dry, 99:1...1:99, Wet]
Early Reflections - Type
[000...127]
[–15.0...+15.0dB]
[–15.0...+15.0dB]
[000...100%]
[000...100%]
131