Download Print this page

Korg MMT RADIAS Owner's Manual: P08 Amp (amplifier)

Synthesizer/vocoder.
Hide thumbs

Advertisement

Program parameters
2: FiltType (Filter2 Type)  TYPE 
Selects the filter type.
This setting will affect the maximum number of
voices.
LPF, HPF, BPF
These are the same –12 dB/oct type filters as for filter 1.
Refer to p.86 "FiltBal (Filter1 Balance) Ü FILTER TYPE
á."
COMB
In a comb filter (so named for its resemblance to the
teeth of a comb), alternating bands pass and cut the sig-
nal, giving a unique character to the sound. Increasing
the cutoff frequency ("Cutoff" value) will space the
teeth of the comb farther apart, so that more regions are
cut.
COMB (Comb Filter)
3: Cutoff (Cutoff Frequency)  CUTOFF  [000...127]
4: Resonance  RESONANCE 
5: EG1 Int (EG1 Intensity)  EG1 INT  [–63...+63]
6: KeyTrack (Keyboard Track)  KEY TRACK  [–2.0...+2.0]
7: VeloSens (Velocity Sens)
These are the same as for FILTER 1.
Refer to p.86 "P07–1: FILTER1."
P08 AMP (Amplifier)
These are the parameters related to the volume of the
timbre.
P08–1: AMP
1: Level (Amp Level)  LEVEL 
Specifies the volume of the timbre.
If a drum kit is assigned to the timbre, the param-
eter adjusted by the front panel [LEVEL] knob will
be the P02–2: COMMON – DRUM tab page "Lev-
el" parameter.
88
[LPF, HPF, BPF, COMB]
Frequency
Cutoff
[000...127]
[–63...+63]
[000...127]
2: Pan  PAN 
Adjusts the panning (stereo position) of the timbre.
If a drum kit is assigned to the timbre, the param-
eter adjusted by the front panel [PAN] knob will
be the P02–2: COMMON – DRUM tab page "Pan"
parameter.
3: Drive/WS (Drive/Wave Shape)  DRIVE/WS 
Activates the drive or wave shape functions.
This setting will affect the maximum number of
voices.
Off
Drive and wave shape functions will be off.
Drive
Drive will be applied. The amount of distortion is ad-
justed by the output level of each oscillator in the P06–3:
OSC/MIXER – MIXER tab page (or the MIXER [OSC1]
knob, etc.).
WavShape
Wave shape will be applied according to the wave shape
type selected by "WS Type".
4: Position
Specifies the position at which the drive or wave shape
functions will be applied.
PreFilt1
Drive or wave shape will be applied before filter 1.
PreAmp
Drive or wave shape will be applied after the filter and
before the amp.
5: Depth
Specifies the depth at which the drive or wave shape
functions will be applied.
6: WS Type (Wave Shape Type)
Selects the type of wave shape. This is shown and can be
edited if "Drive/WS" is set to WS.
This setting will affect the maximum number of
voices.
Some settings may produce noise.
Decimator
Lowers the sampling frequency.
Depth: 000
Depth: 064
Hard Clip
Flattens any portion of the waveform above the limit.
[L63...CNT...R63]
[Off, Drive, WavShape]
[PreFilt1, PreAmp]
[000...127]
[Decimator...Lvl Boost]
Depth: 127

Advertisement

   Also See for Korg MMT RADIAS

   Related Manuals for Korg MMT RADIAS

   Related Content for Korg MMT RADIAS

This manual also for:

Radias

Comments to this Manuals

Symbols: 0
Latest comments: