Press the [EXIT/NO] button.
You will return to the screen of step 1.
Do not operate the RADIAS' knobs, buttons, keyboard, or wheels etc. while data is being transmit-
In order to receive a data dump into the RADIAS, you must first turn the Global mode P02: MEM-
ORY page "Protect" Off, and set the P06: MIDI FILTER page "SystemEx" to . Data dumps cannot
be received if these parameters are set otherwise. (☞p.115 "Protect," p.118 "SystemEx (System Ex-
Using the included RADIAS Sound Editor software
You can use the included RADIAS Sound Editor software to edit the RADIAS from your computer. To use
the RADIAS Sound Editor software, make the following settings on the RADIAS.
When using the RADIAS Sound Editor software, large amounts of data must be transferred be-
tween the RADIAS and your computer, so we recommend that you use a USB connection, which
will provide faster data transmission.
Connect the RADIAS to your computer.
☞p.18 "6. Connecting your computer"
Go to the Global mode P02: MEMORY page.
Turn "Protect" Off.
Go to the Global mode P04: MIDI page.
Set "Routing" to USB or USB+MIDI.
Go to the Global mode P06: MIDI FILTER page.
Set "SystemEx" to .
Press the [PROGRAM] button to return to the Pro-
For details on installing the software, making settings
after connection, and operation, refer to the owner's
manual for the RADIAS Sound Editor software on the
If you want to save these settings, you'll need to write Global data. (☞p.68 "5. Saving global pa-
Global parameter editing