Using The Data Protector Gui - HP Data Protector A.06.11 Integration Manual

on the Cell Manager. The file is named
VMwareManagementClient%_OB2_GLOBAL.
NOTE:
Before the information is saved, Data Protector first tests the connection. If the
connection fails, the information is not saved in the configuration file, leaving
the previous login information (if it exists) in the configuration file intact.
• Instruct Data Protector to use the login information contained in a local file on the
VMware management client (Integrated security). At the beginning of a backup
session, the Session Manager starts the VMware integration agent on the VMware
management client and the agent provides the information from the file.
To configure VMware management clients, use the Data Protector GUI or CLI.

Using the Data Protector GUI

You specify the login information in the Configure VMware dialog box. The dialog
box is displayed automatically when you create the first backup specification. To
change or check the parameters later, open any backup specification for this VMware
management client, go to the Source page, right-click the client at the top, and click
Configure.
40 Integrating VMware Virtual Infrastructure and Data Protector