Restoring Using Another Device; Monitoring Sessions; Troubleshooting - HP Data Protector A.06.11 Integration Manual

Restoring using another device

You can restore using a device other than that used for backup.
Specify the new device in the file:
Windows: Data_Protector_home\Config\server\Cell\restoredev
UNIX: /etc/opt/omni/server/cell/restoredev
Use the format:
"DEV 1" "DEV 2"
where DEV 1 is the original device and DEV 2 the new device.
IMPORTANT:
Delete this file after use.
On Windows, use the Unicode format for the file.

Monitoring sessions

You can monitor currently running sessions in the Data Protector GUI. When you run
an interactive backup or restore session, a monitor window shows you the progress
of the session. Closing the GUI does not affect the session.
You can also monitor sessions from any Data Protector client with the User
Interface component installed, using the Monitor context.
On how to monitor a session, see the online Help index: "viewing currently running
sessions".

Troubleshooting

This section lists general checks and verifications.
For general Data Protector troubleshooting information, see the HP Data Protector
troubleshooting guide.
Integration guide for VMware Virtual Infrastructure, Sybase, Network Node Manager,
and Network Data Management Protocol Server 145