Chapter 2: Installing Data Protector Express With The Gui Installer; Data Protector Express Installation Manager Overview; Launch Data Protector Express Installation Manager; Windows Launch - HP BB118BV - StorageWorks Data Protector Express Package Installation Manual

Chapter 2: Installing Data Protector Express
with the GUI Installer
This section provides instructions on how to install Data Protector Express using the GUI installer on
Windows or Linux systems.
In this section
•

Data Protector Express Installation Manager Overview

•

Launch Data Protector Express Installation Manager

•
Using Data Protector Express Installation Manager
Data Protector Express Installation Manager Overview
•
Launch the Data Protector Express Installation Manager (see Launch Data Protector Express
Installation Manager).
•
Then use it to install, upgrade, or remove Data Protector Express (see Using Data Protector Express
Installation Manager).
Launch Data Protector Express Installation Manager

Windows Launch

NOTE: If Data Protector Express is running, you must close it before continuing.
You must have Administrator access to install Data Protector Express.
To launch the Data Protector Express Installation Manager
1. Select one of the following choices:
•
•
2. To display the Installation Manager screens, options and messages in a different language, select the
appropriate language under the Languages task bar.
3. To display an online help topic, click a link in the Dynamic help task bar.

Linux Launch

You must install Data Protector Express as the root user.
Select from the following choices:
CD drive: From the Data Protector Express CD-ROM, be sure a CD drive is attached to your Linux
machine before using the following installation instructions. If a CD drive is not attached to the machine,
you must copy the CD to your local hard drive if this is the first time that you have installed Data
Protector Express. You can also download a CD image.
Insert the Data Protector Express CD-ROM in your CD drive. The Data Protector Express
Installation Manager launches automatically.
Access the root directory on the Data Protector Express CD-ROM and double-click setup.exe.
5