Main Integration Components - HP Data Protector A.06.11 Integration Manual

• A storage repository is not specified. In this case, both disks are restored into the
default storage repository.
• A storage repository is specified. In this case, both disks are restored into the
specified storage repository. For example, if the Shared Storage repository is
specified, both disks are restored into the Shared Storage repository.
This means that the virtual machine can be restored successfully, but it is only possible
to restore the disks to a single storage repository, regardless of the original
configuration.

Main integration components

To function, this integration requires the following components:
• Supported Citrix XenServer
• HP Data Protector client(s) with:
• Disk Agent
• Media Agent
• Integration scripts
A simple example layout for these components (with both Disk Agent and Media
Agent on the same Data Protector client) is shown in
No scripts are installed on the Citrix XenServer, but its export facility is used by the
integration scripts. The integration scripts themselves are all installed on the Data
Protector client with the Disk Agent installed.
During backup, virtual machines, or virtual machine disks, are exported to the Disk
Agent host and backed up using Data Protector. The device used for the backup can
be any device supported by Data Protector for file-system backup.
200 Integrating Citrix XenServer and HP Data Protector
Figure 72.