Snmp Configuration On Windows; Data Protector Gui Reporting Context - HP Data Protector A.06.11 Integration Manual

For operations manager for windows

Hide thumbs Also See for Data Protector A.06.11:

Table of Contents

Configure Data Protector to send SNMP traps to the DP Cell Manager:

Using the Data Protector GUI Reporting context, set up all Notification

events to use:

• SNMP as delivery method

• Cell Manager system as the destination

Figure 2 Data Protector GUI Reporting Context

Add the Cell Manager hostname as trap destination to the OVdests file

in /etc/opt/omni/snmp (Data Protector 5.1) /etc/opt/omni/

server/snmp (Data Protector 5.5 and above).

Disable filtering of SNMP traps by emptying the OVfilter file in /etc/

opt/omni/snmp (Data Protector 5.1) /etc/opt/omni/server/snmp

(Data Protector 5.5 and above).

SNMP configuration on Windows

Configure the Windows system to forward its SNMP traps to the Operations Manager

Server as follows:

To enable Data Protector to send SNMP traps, run the command: omnisnmp

To set the SNMP mode execute the following command:

ovconfchg -ns eaagt -set SNMP_SESSION_MODE NO_TRAPD

Integration guide for HP Operations Manager for Windows

Table of Contents