Installation Of The Integration Scripts - HP Data Protector A.06.11 Integration Manual

NOTE:
The installers may require a Python version earlier than the latest available, so it is
best to check the situation before installing Python. For example, the fact that the
pycurl-ssl-7.18.2.win32-py2.5.exe contains the string py2.5 implies
that python 2.5 is required.
• xenAPI.py for the version of XenServer that you are using (available from
/community.citrix.com/display/xs/Download+SDKs)
TIP:
Note the full installation directory of python. You will need this later when calling the
Data Protector Pre-exec and Post-exec scripts. For this documentation it is assumed to
be:
• On Windows: Data_Protector_home\bin\Python25\
• On Linux: /opt/omni/bin/Python25/

Installation of the integration scripts

The following scripts are supplied for the integration:
•
DPxen_config.py
•
DPxen_operations.py
•
DPxen_backup.py
•
DPxen_restore.py
•
DPxen_postbackup.py
They are available as follows:
• For Data Protector A.06.1 1, on the Data Protector A.06.1 1 DVD–ROM in
directory:
• For Windows: DP611_WIN_OTHER\Windows_other\Xen_sup
• For Linux: DP611_SOL_LINUX/Xen_sup
• For other versions of Data Protector for which the integration is supported, as a
download package:
1. Go to
202 Integrating Citrix XenServer and HP Data Protector
http://www.hp.com/go/dataprotector
http:/