Emc Celerra Configuration; Analyzing The Library Robotics' Scsi Address - HP Data Protector A.06.11 Integration Manual

Example
The output for a DLT 4000 drive is:
nrst0m - no rewind device, format is:42500 bpi 6.0GB
Library robotics
To get the SCSI address of the library robotics connected to the NDMP Server system,
run:
sysconfig -m
on the NDMP Server system. The SCSI address consists of two parts. See
22 on page 177.
Table 22 Analyzing the library Robotics' SCSI address
Parts
mc
{0 | 1 | 2 | ...}
Example
The output for a DLT 4000 library is:
mc0

EMC Celerra configuration

Before you begin
• Ensure that the NDMP Server is online.
SCSI devices
To get information about SCSI devices (tape drives and library robotics) connected
to the EMC Celerra NAS device:
1. Log in to the Celerra control station.
2. Run:
server_devconfig server_name -list -scsi -all
Integration guide for VMware Virtual Infrastructure, Sybase, Network Node Manager,
Description
Media changer device (always present).
Device number.
and Network Data Management Protocol Server
Table
177