HP Data Protector A.06.11 Integration Manual page 90

3. Run:
Restore of virtual machines:
omnir -vmware
-barhost OriginalVMwareManagementClient
–instance OriginalDatacenter
–method {Snapshot | Suspend | VCBimage}
[-session SessionID]
VirtualMachines [-disk Disk [-disk Disk...]]
[VirtualMachines [-disk Disk [-disk Disk...]]...]
[–destination RestoreClient]
[–newinstance TargetDatacenter]
[-consolidate]
[-memory]
[–register]
[–poweron]
[–overwrite [older]]
Restore of filesystems:
omnir -vmware
-barhost OriginalVMwareManagementClient
–instance OriginalDatacenter
–method VCBfile
[-session SessionID]
VirtualMachines —target TargetClient [-file File [-file File...]]
[VirtualMachines —target TargetClient [-file File [-file File...]]...]
[–destination RestoreClient]
[–overwrite [older]]
where VirtualMachines must be specified in one of the following ways:
{
-all [-exclude VMFolder [-exclude VMFolder...]] |
—vmfolder VMFolder [-exclude VMFolder [-exclude VMFolder...]] |
—vm VM
}
For description of all the options, see the omnir man page or the HP Data
Protector command line interface reference.
Example (Restoring virtual machines to a datacenter)
Suppose you want to restore the virtual machine /vm/machineA and the individual
disks (scsi0:0 and scsi0:1) of the virtual machine /vm/machineB. At the time
of backup, the virtual machines were running on the ESX Server systems that belonged
90 Integrating VMware Virtual Infrastructure and Data Protector