Block Size; Example Of A List Of Scsi Devices; Supported Block Sizes - HP Data Protector A.06.11 Integration Manual

Example
See Table 23
are the SCSI addresses of the drives in the tape library and c2t0l0 is the SCSI
address of the library robotics.
Table 23 Example of a list of SCSI devices
Name
jbox1
tape2
ttape2

Block size

The integration supports variable tape block sizes. For limitations, see
24 on page 178.
Table 24 Supported block sizes
NAS device
ONTAP < 6.5.3
ONTAP ≥ 6.5.3
Celerra
Prerequisites
• Ensure that the NDMP Server is configured to support variable block size.
The recommended (default) block size is 64 KB. You can set any value between 64
KB and 1024 KB. If the set block size is not supported by the NAS device, and you
start a backup, Data Protector displays an error and aborts the session.
178 Integrating NDMP Server and Data Protector
on page 178 for an example list of SCSI devices. c2t2l0 and c2t3l0
SCSI address Device
type
c2t0l0 jbox
c2t3l0 tape
c2t2l0 tape
Information
ATL P1000 62200001.03
QUANTUM DLT7000 1624q$
QUANTUM DLT7000 1624q$
Block size range (KB)
64
64 ≤ Size ≤ 256
64 ≤ Size ≤ 256
Table