Installation - HP e3000 MPE/iX Manual

Installation

3 Installation
HAFO requires no subsystem product installation. It is an enhancement to
MPE/iX FOS and is installed via operating system patches.
On MPE/iX 7.0 and MPE/iX 7.5 releases you must install MPEMXG9 and
MPEMXH5 (or superceding patches). If you are updating from 6.5 with a
current, active HAFO configuration you need to recreate your HAFOCONF file
(see Chapter 4)
With correct installation, HAFO becomes available, requiring only HAFO
configuration. The HAFO configuration commands are available in SYSGEN.
The HASTAT command generates a HAFO status report for each configured
HAFO Ldev.
Device configuration using the SYSGEN commands is documented in Chapter
4, "Configuration." The HASTAT HAFO status report is documented in Chapter
5, "Monitoring Status."
15