HP e3000 MPE/iX Manual page 20

Configuration
Planning
5. Ensure that the array itself is configured to allow each primary path
6. When the entire plan and map are complete, configure the primary and
Mirrored Disk/iX or Cluster/iX cannot be configured as HAFO devices.
CAUTION
Mirrored disk, Cluster/iX and HAFO can be used on the same system with
multiple volumes and multiple arrays. However, these products must be
completely isolated from each other. That means no shared Ldevs on the bus and
with completely separate cabling and ports.
20
controller to talk to the Ldevs on its corresponding alternate path.
alternate data paths in SYSGEN via the HAutil interface.