Listconf (Li) - HP e3000 MPE/iX Manual

Configuration

LISTCONF (li)

LISTCONF (li)
LISTCONF
configuration for a specific Ldev. The syntax is:
LI <Ldev>
The <Ldev> is optional. For example:
ha> li
The LI command without any qualifier lists all Ldevs configured with their
primary and alternate paths.
Ldev Primary Path
===== ==================== ================== =======
350 0/4/0/0.70954.23
351 0/4/0/0.70954.24
352 0/6/0/0.73289.25
353 0/6/0/0.73289.26
450 0/6/2/1.3.3
451 0/6/2/1.3.4
452 0/6/2/0.3.5
453 0/6/2/0.3.6
The LI command with the Ldev number lists the Ldev and its configured
primary and alternate paths. For example:
ha> li 350
Ldev Primary Path
===== ==================== ================== =======
350 0/4/0/0.70954.23
Listing the configuration for an Ldev just added using
• Confirms it is in the temporary HAFOCONF file
• Allows you to recheck the accuracy of the paths
The
NOTE
The temporary file is an exact copy of the permanent file when you first enter
the ha> section. Any adds or deletes of Ldevs will be shown by
they will not be in the permanent file until you have done a hold and keep within
SYSGEN.
24
displays the entire configuration in the HAFOCONF file or the
Alternate Path
0/6/0/0.73289
0/6/0/0.73289
0/4/0/0.70954
0/4/0/0.70954
0/6/2/0
0/6/2/0
0/6/2/1
0/6/2/1
Alternate Path
0/6/0/0.73289
command lists the contents of the temporary HAFOCONF file.
LISTCONF
Timeout
True
True
False
False
True
True
False
False
Timeout
True
ADDCONF
:
, but
LISTCONF