HP e3000 MPE/iX Manual page 60

Appendix - B
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1015 MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1015)
CAUSE: A message was sent to the Device Manager with an invalid function.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io) section configuration and the HAFO (ha) section configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1016 MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1016)
CAUSE: A message was received from the Device Manager with an invalid
function.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io) section configuration and the HAFO (ha) section configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
60