Installing The Data Protector Integration; Supported Platforms And Installation Prerequisites - HP Data Protector A.06.11 Integration Manual

2 Installing the Data Protector
Integration
This chapter describes:
• Prerequisites for installing the Data Protector integration.
• Installing the Data Protector Integration on the Operations Manager Server system.
• Installing Data Protector Integration components on Operations Manager managed
node (Data Protector Cell Manager) system.
• Uninstalling Data Protector Integration components from Operations Manager
managed node (Data Protector Cell Manager) systems.
• Uninstalling the Data Protector Integration from the Operations Manager Server
system.

Supported platforms and installation prerequisites

The Data Protector integration is used to monitor and manage the health and
performance of Data Protector environments. You can manage one or more Data
Protector cells with the integration. It should only be installed in an environment
consisting of:
• One or more systems running Operations Manager Server
• The Operations Manager Server with Console (remote consoles are not supported)
and the Data Protector Console installed on the same system.
• Operations Manager Agent running on systems with the Data Protector Cell
Manager.
Before installing the Data Protector Integration, ensure that the requirements described
in the sections below are met.
Integration guide for HP Operations Manager for Windows 23