If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1012
MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1012)
CAUSE: Failover failed — Volume label verification failed.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io) section configuration and the HAFO (ha) section configuration
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1013
MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1013)
CAUSE: Failover failed — Mounted Volume Table inconsistent.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io) section configuration and the HAFO (ha) section configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1014
MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1014)
CAUSE: The Device Manager is in the wrong state for the command being
executed.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io) section configuration and the HAFO (ha) section configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Appendix-B
59