HP e3000 MPE/iX Manual page 58

Appendix - B
1009 MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1009)
CAUSE: An error occurred while attempting to send a message to Device
Manager.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io) section configuration and the HAFO (ha) section configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1010 MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1010)
CAUSE: An I/O request sent to the Device Manager caused a message to be sent
to the wrong port.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io section) configuration and the HAFO (ha section) configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
If the HAFO primary and SYSGEN (io) paths are in sync and all HAFO Ldevs
are operating on their primary paths, then call your HP Support Representative
for assistance.
1011 MESSAGE: HAFO INTERNAL ERROR — (HAFOERR 1011)
CAUSE: Failover to Alternate path during Volume Label Verification failed.
ACTION: Check to make sure that there are no mismatches between the
SYSGEN (io section) configuration and the HAFO (ha section) configuration.
All HAFO (ha) configured primary paths must match the SYSGEN (io) path
configuration for all HAFO Ldevs.
Check that there are no hardware problems and make sure no failover events
have occurred. If a failover event has occurred, fix the primary path and make
sure all HAFO Ldevs are operating on their primary path.
58