Polycom RMX 2000 Installation & Configuration Manual page 8

Field
Type
11 Click Next.
12 If you selected H.323 only go to Step 15.
13 In the Fast Configuration Wizard - SIP dialog box, enter the following
information:
Field
SIP Server
SIP Server IP
Address
Transport Type
8
Description
Select the type that defines the format in which the
card alias is sent to the gatekeeper.
•
H.323 ID (alphanumeric ID)
•
E.164 (0-9, * #)
•
URL ID (URL style address)
•
Transport ID (IP address: port number)
•
Email ID (email address format)
•
Party Number (identical to the E.164 format)
Note: Although all alias types are supported (with
H.323 and E.164 being the most common), the type to
be used depends on your gatekeeper's capabilities.
Description
Select:
• Specify – to manually configure SIP servers.
•
Off – if SIP servers are not present in the network.
Enter either the IP address of the preferred SIP server
or its host name (if a DNS server is used).
Select the protocol that is used for signaling between
the MCU and the SIP Server or the endpoints
according to the protocol supported by the SIP Server: