Polycom RMX 2000 Installation & Configuration Manual page 18

Conferencing Entities
The RMX is shipped with one Entry Queue and four Meeting Rooms:
• Entry Queue DefaultEQ whose ID is 1000, and it is used to access
the default Meeting Rooms
• Four Meeting Rooms whose IDs are 1001, 1002, 1003 and 1004.
The default conferencing entities are set to line rate of 384 Kbps, Auto
Layout, Polycom Skin and has a default duration of one hour.
The default Entry Queue is also set to Ad Hoc conferencing which
allows participants to start new conferences without prior definition by
entering a Conference or Meeting Room ID other than those used for the
default Meeting Rooms and that is not used by any on going conference
currently running on the MCU.
For IP conferencing, these conferencing entities can be used to start new
conferences without any additional settings.
However, if ISDN/PSTN endpoints are participating in the conferences
an ISDN/PSTN dial-in number must be manually assigned to the Entry
Queue as the number depends on the dial-in numbers range defined in
the Network Service.
For more information see the RMX 2000 Administrator's Guide,
"ISDN/PSTN Network Services" on page 9-24.
If additional Entry Queues and Meeting Rooms are required, for
example, for conferencing at different line rates, you can customize the
conferencing entities to your organization's requirements and define
additional conferencing entities. For more details, see the RMX 2000
Administrator's Guide.
To start ongoing conferences and monitor their status see the RMX 2000
Getting Started Guide.
18