User Definition - Polycom RMX 2000 Installation & Configuration Manual

40 When the Login screen is displayed, enter your Username and
Password and click Login.
On first entry, the default Username and Password are both
POLYCOM.
Create a new User with Administrator permissions and delete the
Default User (POLYCOM). For more information see "User
Definition" on page 1-16.
For system security reasons the system is not fully configured until
this step has been performed.
The system is now fully configured and if there are no System
Errors, the green RDY LED on the CNTL module (on the RMX's
front panel) turns ON.

User Definition

The RMX is shipped with a default Administrator user called
POLYCOM. Once you have defined other authorized administrator
users, it is recommended to remove the default user to prevent
unauthorized users from logging into the system.
To add a new user to the system:
1
In the RMX Management pane, click the Users option.
The Users pane appears.
2
Click the New User button or right-click anywhere in the pane and
then click New User.
The New User Properties dialog box opens.
3
In the User Name text box, enter the name of the new user. This is
the login name used by the user when logging into the system.
4
In the Password text box, enter the new user's password. This will
be the user's password when logging into the system.
5
In the Authorization Level list, select the user type which determines
the application display and functionality.
6
Click OK.
16