Polycom RMX 2000 Installation & Configuration Manual page 15

Flag
Minimum
Conference ID
Length (User)
Maximum
Conference ID
Length (User)
MCU Display Name
Terminate
Conference when
Chairperson Exits
Auto Extend
Conferences
These flags can be modified later, if required, via the Setup menu's
System Configuration option. For more information, see the RMX
2000 Administrator's Guide, "System Configuration" on page 12-11.
35 Click Save & Close.
The RMX confirms successful configuration.
36 In the Success Message box, click OK.
37 In the Reset Confirmation dialog box, click Yes.
38 In the Please wait for system reset message box, click OK.
System restart may take up to five minutes.
39 Refresh the browser periodically until the Login screen is displayed.
Value
The minimum number of digits that
the user must enter when
manually assigning a numeric ID
to a conference.
Range: 2-16 (Default: 4)
The maximum number of digits
that the user can enter when
manually assigning a Numeric ID
to a conference.
Range: 2-16 (Default: 8)
The MCU name that appears at the endpoints.
Default: Polycom RMX 2000
Yes/No (Default: Yes)
When Yes is selected (default) allows conferences
running on the RMX to be automatically extended as
long as there are participants connected and there are
available resources.
Selecting 2
digits limits the
number of
simultaneous
ongoing
conferences to
99.
15